OneUp Components EDC Top Cap

At 4.2 grams, the OneUp Components EDC Top Cap is the lightest available top cap and a necessary component of the OneUp EDC (Every Day Carry) storage system which allows you to store essential bike tools inside the steerer tube of your fork. The Top Cap Kit is only compatible with 1.5″ tapered mountain bike forks with aluminum steerer tubes.

Fork Requirements
–
The EDC Top Cap Kit is only compatible with 1.5" Tapered mountain bike forks with an aluminum steerer tube. Carbon and Steel steerer tube forks are NOT compatible. To install EDC in your fork you must have at least 3mm of steerer tube above your stem when installed and use a minimum 5mm headset spacer above your stem. A 10mm headset spacer stack above your stem is recommended.

Steerer Tube Star Nut Diameter
–
The inner diameter must be between 24.25 mm-24.80 mm. To check, this will require a OneUp "Go, No-Go Gauge" or a good set of calipers (that your local shop should have). If you have a Fox 32 we recommend checking this before ordering the tap and gauge kit as some models have steerers that are outside this range. Otherwise it is very unlikely you will have an issue.

Steerer Tube Minimum Diameter
–
Minimum diameter 22.1 mm (0.87"). To check, you can push a 16g or 20g CO2 cannister or a standard MTB handlebar up through the hole in the bottom of your fork steerer. If you can touch your star nut, you're all good.

Steerer tube Max Diameter (opening in the underside of your fork crown)
–
31.75 mm – 34.00 mm dia. (1.25-1.34"). This is to ensure the EDC fork plug can be fitted. This is not essential, but ensures the EDC tool cannot rattle inside your fork.

Specs

• Material:
  Aluminum, Polycarbonate, PVC

• Biking Type:
  Mountain

  More

  Biking Type

  Mountain
  Mountain bikes are built for tackling rough terrain with frames made of durable materials like aluminum or carbon fiber, ensuring stability and maneuverability. They feature suspension to absorb impacts from rocks, roots, and drops, providing a smoother ride.

• Used For:
  Cross Country, Trail, Enduro

  More

  Used For

  Cross Country

  With speed and pedaling efficiency in mind, cross country (XC) bikes are the lightest mountain bikes with the least suspension travel (typically 0 – 120mm). Trail

  Trail bikes are the quintessential “mountain bikes.” If you’re heading into the woods expecting to do it all on two wheels – climbing, technical sections, AND fun descents – you’re looking for a trail bike. Enduro

  If you’re looking for maximum performance while flying down heavier trails, an enduro bike is for you. These bikes combine ample suspension travel (typically 150mm+) with descent-focused frame geometry and components that allow for reasonably efficient pedaling.

• Steer Tube Diameter (in):
  1.5

Other Notes

OneUp Components products can only be shipped within the United States and Canada